Arch for roses - how to make it yourself from fittings
Content:
Arches for climbing roses are a wonderful decoration for a garden or a courtyard. They can be purchased in a specialized store, made to order, or made by hand from scrap materials.
Arch for roses - a short description, garden decoration
Arches for climbing roses are usually rectangular and semicircular structures with a height of 2 meters. The vaults are not only an opportunity to diversify the landscape, but also it is interesting to solve the problem of long wavy plants.
Arch with roses - a unique addition to the landscape composition in the garden
What is needed to create a product
First, an image of the future arch is created, the optimal dimensions are selected, and only then the necessary materials and tools are purchased.
Drawing
A drawing is a drawing of a product on paper in a reduced form, but with all the exact parameters. The height and width of the arch at the base, as well as the distance between its rods, are taken into account.
What to make
The main materials for arched work can be:
- Wood, which is most often reinforced with rod parts, and is additionally treated with moisture protection agents.
- Metal: rods and pins of round diameter, wire.
- Durable and temperature-resistant plastic tubes.
Tools
The appropriate construction tools are selected for the selected basis:
- Saw or jigsaw for working with wood material.
- Welding machine, if the arch is metal.
- Soldering iron for cutting plastic pipes.
- Fastening elements. Nails and planks are used when manipulating wood, clamps are chosen as fixings for metal arches, glue is intended for plastic structures.
At the beginning of work, it is very important to draw up an accurate design drawing.
Material
The correct choice of materials is the key to a quality product that will last for many years.
Rebar, recommended diameter
If the arch for roses is made of metal, then you need to stock up on thick rods for the main part of the product and connecting parts. The diameter of the reinforcement is recommended to be taken about 12 mm, according to the type of profile or with a smooth surface; the length of the rod depends on the desired arch size. For connecting parts, you need 10 metal pieces 100-120 cm long and no more than 10 mm in diameter.
Soft (copper) wire
In addition to metal rods, you will need soft wire, for example, aluminum, to connect the arched elements.
Plastic clamps
In this design, the use of plastic clamps is also common. These are strong but flexible ties that allow you to firmly fix the desired area without much effort. It is preferable to choose clamps that are transparent or that repeat the color of the frame.
How to bend the armature with your own hands
Metal rods can be given the desired shape not only by means of a pipe bender or machine, but also manually.
Adaptation
First, preparation must be carried out in order to then bend the reinforcement. A template is formed from a meter rope. Calculations of the required arch size must be transferred to a free area with the help of a rope. The top of the semicircle and the base are marked with pegs that stick into the ground. According to the sample made, they are guided in the process of creating a frame base.
Step by step instructions on how to bend a rod
Stages of self-bending of the structure by hand:
- The ends of the fittings are inserted into the tubes.
- One edge is additionally clamped in a vice. To bend, the end of the pipe must be stepped on, while the second edge gradually rises up. Both parts of the rod should be on the same level.
- The bent rod is checked against the sample.
Installation process
The final stage of work is assembling the arch in the right order and fixing the elements.
How to assemble a structure - step by step instructions
To mount a double arch, you need to connect the rods using several metal rings. The rings, in turn, are secured to the frame with wire and nylon ties. Next, you need to make holes in the ground up to 0.5 meters deep and insert reinforcement into them, taking into account the distance between the bases of the rods. Before or after collection, all structural elements must be primed.
A variety of materials are used to create arches.
Features of fastening elements without welding
As described above in the instructions, no technical welding and specific tools were used for the vault. Inside the structure there are rings, also made of reinforcement, only of a smaller diameter. They are fixed with clamps and flexible wire. An alternative way to connect the fragments is not rings, but metal pieces. But in the latter case, it will not work to tie, so you will need to weld them to the arch.
Where is the best place to install an arch for roses
There are many ways to place the structure in the garden - the owner's choice. There are three popular options.
At the gate
Immediately upon entering a house or courtyard, a vault of roses certainly decorates. When decorating a gate, you need to remember that the arch should be quite high and wide so that you can pass under it, even if the flowers grow. Also, it should have an aesthetic appearance and harmoniously transition into the fence.
Along the garden path
If there is a separate path in the garden, a similar dome can be installed at its beginning. A more original option is the arrangement of arches along the entire alley: traditionally, they are made the same in size and are located parallel to each other, at an equal distance.
As an element of garden zoning
With the help of an arched dome, you can intelligently divide a suburban area, for example, into a vegetable garden area and a place of relaxation. In the recreation area, not only a bright flower arch will look organic, but also a bench or a full-fledged gazebo with a roof.
DIY rose arches examples
What are the arched structures:
- In shape - rectangular, rounded, heart-shaped, etc.
- In terms of complexity, arches can be single or double, multi-level with transitions.
- From different types of supports - wooden, metal profile or polypropylene material.
- The colors are a combination of a white or neutral arch with red buds, pink flowers fit blue supports, pastel flowers look good against a background of dark frames.
- Interesting design solutions - an arch with a gazebo, an arch-gate, an alley with a vault of roses, etc.
The most functional arches are collapsible or portable
Homemade products in the country always look more creative than purchased ones.If a garden arch for roses will be part of landscape design, when making it, it is important to decide on the starting materials and choose the right tools, as well as have the appropriate practical skills.
